Chevrolet 2011 Traverse Bedienungsanleitung PDF herunterladen (Seite 363)

Black plate (51,1)

Chevrolet Traverse Owner Manual - 2011

Vehicle Care 10-51

After the tires have been

rotated, adjust the front and rear

inflation pressures as shown on

the Tire and Loading Information

label. See Tire Pressure on

page 10‑44 and Vehicle Load

Limits on page 9‑12.

Reset the Tire Pressure Monitor

System. See Tire Pressure

Monitor Operation on

page 10‑47.

Make certain that all wheel nuts

are properly tightened. See

“Wheel Nut Torque” under

Capacities and Specifications on

page 12‑2.

{

WARNING

Rust or dirt on a wheel, or on the

parts to which it is fastened, can

make wheel nuts become loose

after time. The wheel could come

off and cause an accident. When

(Continued)

WARNING (Continued)

changing a wheel, remove any

rust or dirt from places where the

wheel attaches to the vehicle. In

an emergency, use a cloth or a

paper towel to do this; but be sure

to use a scraper or wire brush

later, if needed, to get all the rust

or dirt off. See If a Tire Goes Flat

on page 10‑58.

Lightly coat the center of the

wheel hub with wheel bearing

grease after a wheel change or

tire rotation to prevent corrosion

or rust build-up. Do not get

grease on the flat wheel

mounting surface or on the

wheel nuts or bolts.

Make sure the spare tire, if the

vehicle has one, is stored

securely. Push, pull, and then try

to rotate or turn the tire. If it

moves, tighten the cable. See

Tire Changing on page 10‑68.

When It Is Time for New

Tires

Factors such as maintenance,

temperatures, driving speeds,

vehicle loading, and road conditions

affect the wear rate of the tires.

Treadwear indicators are one way to

tell when it is time for new tires.

Treadwear indicators appear when

the tires have only 1.6 mm (1/16 in)

1 2 ... 358 359 360 361 362 363 364 365 366 367 368 ... 451 452

Kommentare zu diesen Handbüchern

Keine Kommentare