Chevrolet 2012 Malibu Bedienungsanleitung PDF herunterladen (Seite 279)

Black plate (51,1)

Chevrolet Malibu Owner Manual - 2012

Vehicle Care 10-51

8. The driver side rear turn signal

comes on to indicate that corner

sensor is ready to be learned.

Proceed to the driver side rear

tire, and repeat the procedure in

Step 5.

9. After hearing the single horn

chirp for the driver side rear tire,

two additional horn chirps sound

to indicate the tire learning

process is done. Turn the

ignition switch to LOCK/OFF.

If no tires are learned after

entering the TPMS learn mode,

or if communication with the

receiver stops, or if the time limit

has expired, turn the ignition

switch to LOCK/OFF and start

over beginning with Step 2.

10. Set all four tires to the

recommended air pressure

level as indicated on the Tire

and Loading Information label.

Tire Inspection

We recommend that the tires,

including the spare tire, if the

vehicle has one, be inspected

for signs of wear or damage at

least once a month.

Replace the tire if:

.

The indicators at three or

more places around the tire

can be seen.

.

There is cord or fabric

showing through the tire's

rubber.

.

The tread or sidewall is

cracked, cut, or snagged

deep enough to show cord or

fabric.

.

The tire has a bump, bulge,

or split.

.

The tire has a puncture, cut,

or other damage that cannot

be repaired well because of

the size or location of the

damage.

Tire Rotation

Tires should be rotated every

12 000 km (7,500 mi). See

Maintenance Schedule on

page 11‑3.

Tires are rotated to achieve a

uniform wear for all tires. The

first rotation is the most

important.

Any time unusual wear is

noticed, rotate the tires as soon

as possible and check the wheel

alignment. Also check for

damaged tires or wheels. See

When It Is Time for New Tires

on page 10‑52 and Wheel

Replacement on page 10‑57.

1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 375 376

Kommentare zu diesen Handbüchern

Keine Kommentare