Chevrolet Captiva C140 Spezifikationen PDF herunterladen (Seite 90)

4-6 Instruments and Controls

To operate the windshield wipers once

in case of light rain or mist, lightly press

the windshield wiper/washer lever

down and release it. The lever will

return automatically to its normal

position when released. The wipers will

operate through one cycle.

For vehicles with automatic windshield

wipers with Rainsense, the rain sensor

detects the amount of water on the

windshield and automatically adjusts

the windshield wipers.

AUTO: Turns the windshield wipers

on automatically.

The sensitivity of the system can be

adjusted by turning the band on the

windshield wiper lever towards F or S.

When the wiper lever is moved to

AUTO position while the ignition is in

ON/RUN or ACC/ ACCESSORY, the

windshield wipers turn on once to

check the system.

OFF: Turns the automatic windshield

wiper system off.

The rain sensor is located near the top of

the windshield and must be free from

dust and dirt to work properly. See

Wiper Blade Replacement on page

9-30.

Caution

Less than clear vision for the driver

can lead to an accident resulting in

personal injury and damage to your

vehicle or other property.

Do not operate the windshield

wipers when the windshield is dry or

obstructed, as with snow or ice.

Using the wipers on an obstructed

windshield can damage the wiper

blades, wiper motor, and glass.

Check blades are not frozen to

windshield before operating in cold

weather. Wiper operation while

blade is frozen can damage wiper

motor.

Caution

Do not switch on the windscreen wiper

or set them to automatic operation

with rain sensor in car washes. This

could damage the wiper blades or

wiper system.

The wipers are not operated when shift

lever of automatic transaxle is in "N"

position and vehicle speed is lower than

5 km/h.

Misting function Automatic Windshield Wipers

With Rainsense

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 337 338

Kommentare zu diesen Handbüchern

Keine Kommentare