Chevrolet Captiva Wartungshandbuch PDF herunterladen (Seite 342)

340 Vehicle care

1913320

11. Reinstall the wheel nuts. Tighten

each nut by hand until the wheel

is held against the hub.

12. Rotate wheel wrench or jack

handle counterclockwise and

lower vehicle to the ground.

13. Tighten wheel nuts firmly to 92

lb-ft (125 Nm) in a crisscross

sequence. 12345 (See

fig. below)

14. Hang the tyre carrier on the

support rod and tighten the bolt in

the hole above the rear bumper

to 4.4 lb-ft (6 Nm) to raise the tyre

carrier.

15. Hook the cable and reinstall the

hole cover in its original position.

16. Secure the jack and tools in their

original position and the flat tyre

in the luggage compartment.

Caution

Never use oil or grease on wheel

nuts.

Always use correct wheel nuts.

As soon as possible, take your car

to a repairer and have the wheel

nuts tightened according to

specifications.

If tightened incorrectly, the nuts

might come loose.

{Warning

Make sure to use the correct nuts

or bolts tightened to the proper

torque.

Incorrect wheel nuts or bolts or

improperly tightened wheel nuts or

bolts can cause the wheel to come

loose and even come off. This

could lead to an accident.

1 2 ... 337 338 339 340 341 342 343 344 345 346 347 ... 379 380

Kommentare zu diesen Handbüchern

Keine Kommentare