Chevrolet Impala 2014 Bedienungshandbuch PDF herunterladen (Seite 26)

2014 Chevrolet MuniCipal vehiCles teChniCal Manual

26 | aIr Bags faq

Can specialty vehicle equipment (e.g. radar devices, video

cameras, computers, meters, radio trees, shotguns, etc.) still be

mounted in cars with passenger side air bags?

Yes, but care must be taken to mount the equipment outside of the deployment zone.

Air bags inflate with great force and will interact with any object in the deployment

zone. Therefore, to reduce the risk of injury to vehicle occupants, GM recommends

that the air deployment zone be kept free of any equipment. If a piece of equipment

were to become dislodged it could strike an occupant in the vehicle and result in

injury. The likelihood of an object becoming dislodged is influenced by many factors,

including the proximity of the object to the inflatable restraint, the size and shape of

the object, and the means by which the object is secured to the vehicle. In addition to

these factors, the trajectory and velocity of a dislodged object can be influenced by

the type and severity of vehicle crash.

Objects that are in the deployment zone, but do not become dislodged by an inflating

air bag can still affect the performance of the air bag. For example, such objects could

tear the fabric or affect the shape of the air bag, thus reducing the ability of the bag

to provide restraint.

Is it possible to shield equipment that is installed in the passenger

side frontal air bag deployment zone in a manner that will allow

full and safe air bag deployment?

Due to the complexity of influencing variables, GM is unable to evaluate the potential

for shielding expected equipment configurations in all accident scenarios in order

to assure that the air bag performance would be unaffected. While shielding may

protect certain equipment from being damaged or dislodged, it may also negatively

affect the inflation characteristics of the air bag. The air bag’s shape, inflation angle,

fold pattern, and inflation rate and pressure are developed to maximize the

protection capability of the inflatable restraint system. Therefore, GM cannot

recommend the placement of any equipment in the deployment zone, even if it is

shielded to protect it from damage.

Front air bag systems and instrument panel mounted equipment.

Passenger air bags in GM vehicles deploy in different ways depending upon the type

of vehicle and the particular instrument panel design.

In some vehicles, the passenger air bag deploys through a discrete door located on

the top surface of the instrument panel (top-mount air bag systems). In other

vehicles, such as the Chevrolet Tahoe, the passenger air bag deploys through a

discrete door mounted on the vertical rearward surface of the instrument panel,

above the glove box door (mid-mount air bag system). With these types of top-

mount and mid-mount passenger air bag systems, the top pad of the instrument

panel remains in place during deployment.

Some GM passenger air bag systems, like the system in the Chevrolet Impala, deploy

from beneath the instrument panel top pad. These are considered 3/4-mount air bag

systems with a deployable top pad. The entire instrument panel top pad is the

deployment door from under which the inflating air bag emerges. When an air bag

deployment is commanded, the forces from the inflating passenger air bag push up

on the instrument panel top pad, releasing special fasteners across the rearward edge

of the top pad. This allows the top pad to rotate upward so that the passenger air bag

may emerge. The top pad rotates upward to open widest at the right hand side, and

is usually forced upward into contact with the windshield on the right hand side of

the vehicle during a deployment.

Instrument panel top mounted special equipment, such as a radar antenna and

control unit or video camera must be positioned to the left of the vehicle center line.

This equipment must be mounted as low as possible and securely fastened to the top

pad to avoid being dislodged in the event of a crash and possible air bag deployment.

In the process of securely fastening special equipment to the top, DO NOT fasten

down the top pad itself to any other vehicle component such as the cluster trim plate.

As described above, the top pad rotates upward during a deployment. In order to

enable the proper deployment of the passenger air bag, specialty equipment

installation MUST NOT PREVENT the top pad from rotating upward during

deployment. Location and attachment of special equipment should minimize added

resistance or interference to upward rotation of the top pad during deployment.

Side-Impact Air Bags for crashes to the vehicle sides.

The air bag system in your police vehicle includes includes roof rail mounted Head

Curtain side air bags.. The vehicle is also equipped with seat back mounted upper

body air bags located on the outboard side of the driver and front passenger seat

backs. Together the Head Curtain and seat-mounted side air bags are intended to

protect the head and upper body in the event of a side crash. Some vehicles may also

be equipped with an optional air bag, mounted on the inboard side of the driver seat

back.

Can Specialty Vehicle Security Barriers be mounted within the side

air bag deployment zones?

No. The side air bags inflate extremely fast because of the nature of side crashes to

the vehicle. Mounting a security barrier behind the front seats with the ends placed

within the side air bag deployment zones will result in unintended interaction

between the barrier and the inflating side air bags. To reduce the risk of injury to the

vehicle occupants, GM recommends that the side air bag zones be kept free of any

customer installed equipment.

Customer furnished equipment installed to the vehicle roof.

Your police vehicle is designed with an interior roof cover system which includes

internal components for the interior lamps and wiring. The roof system may also

include side air bag components. Inflation devices may be mounted on the vehicle

roof side behind the rear doors as well as air bag tethers retained to the

windshield pillars. Care must be taken to avoid damage to these components

or interference with their operation when installing roof mounted equipment such

as emergency lamps and communication antennas.

Recommended GM service procedures must be followed to remove

and re-install the instrument panel top pad to ensure that the top

pad will release properly in the event of a passenger air bag

deployment.

On the right half of the top pad closest to the passenger air bag module,

GM recommends that no equipment be mounted. When mounting equipment on the

driver side of the top pad, GM recommends that the total mass of the top pad

mounted special equipment not exceed 8 pounds (3.6 kilograms), since some top

pads tend to rotate about the left end.

Fasteners used to secure special equipment to the instrument panel top pad, the

windshield glass, or to the windshield upper frame (header), should be selected to

ensure that these devices will remain attached during a vehicle crash and possible

air bag deployment.

Head curtain side air bags are designed to help reduce the risk of head and neck injuries to front and rear seat occupants on the near side of certain side-impact collisions. Always

use safety belts and the correct child restraints for your child’s age and size, even in vehicles equipped with air bags. Children are safer when properly secured in a rear seat. See

your vehicle Owner’s Manual and child safety seat instructions for more information.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet Impala 2014 Bedienungshandbuch Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet Impala 2014