Chevrolet Malibu 2007 Spezifikationen PDF herunterladen (Seite 129)

Make sure the shift lever is fully in PARK (P)

before starting the engine. Your vehicle has an

automatic transaxle shift lock control system.

You must fully apply your regular brake ﬁrst and

press the shift lever button before you can

shift from PARK (P) while the ignition key is in

ON. If you cannot shift out of PARK (P), ease

pressure on the shift lever and push the shift

lever all the way into PARK (P) as you maintain

brake application. Then move the shift lever

into another gear. See Shifting Out of Park (P)

on page 134.

REVERSE (R): Use this gear to back up.

Notice: Shifting to REVERSE (R) while your

vehicle is moving forward could damage

the transaxle. The repairs would not be

covered by your warranty. Shift to

REVERSE (R) only after your vehicle is

stopped.

To rock your vehicle back and forth to get out

of snow, ice, or sand without damaging your

transaxle, see If Your Vehicle is Stuck in Sand,

Mud, Ice, or Snow on page 322.

NEUTRAL (N): In this position, your engine does

not connect with the wheels. To restart when

you are already moving, use NEUTRAL (N) only.

Also, use NEUTRAL (N) when your vehicle is

being towed.

{CAUTION:

Shifting into a drive gear while your

engine is running at high speed is

dangerous. Unless your foot is ﬁrmly on

the brake pedal, your vehicle could move

very rapidly. You could lose control and

hit people or objects. Do not shift into a

drive gear while your engine is running

at high speed.

Notice: Shifting out of PARK (P) or

NEUTRAL (N) while the engine is running

at high speed may damage the transaxle.

The repairs would not be covered by your

warranty. Be sure the engine is not running

at high speeds when shifting your vehicle.

129

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 509 510

Kommentare zu diesen Handbüchern

Keine Kommentare