Chevrolet Roadtrek Bedienungsanleitung PDF herunterladen (Seite 55)

Waste Water Tank Dumping:

To dump the exterior black waste water tank:

1. Turn the battery disconnect switch to the “ON”position,if not already on,(located on the monitor panel).

2. Remove sewage discharge hose from storage,(see Picture G-P17).

3. Insert the discharge outlet into the waste receptacle.

4. Open the valve on the sewage hose,(see Picture G-P18).

5. Open the black water tank valve,(see Picture G-P14).

6. Open the driver’s door,press and hold the macerator pump switch until the tank is empty,(see Picture G-

P16).

To dump the grey waste water tank:

1. Open grey water tank valve.

2. Repeat step 6.

3. Close all valves.

4. Return sewage hose to its storage compartment.

5. Turn battery disconnect to the “OFF”position.

NOTICE: It is recommended to always dump the black water tank first,then the grey water tank.

NOTE: If macerator should get clogged you will have to push and turn the manual macerator crank "T" handle

to dislodge any debris that might be blocking the macerator,(see picture G-P15).

WATER SYSTEMS

DDoocc NNoo::

21906532-210C05

RReevv::

CCooppyyrriigghhtt ©© HHaannmmaarr MMoottoorr CCoorrppoorraattiioonn 22000055 GG--77

Picture G-P15:Macerator

pump located under center

of vehicle.

Picture G-P16:Macerator

pump switch located on

driver’s door post.

Picture G-P17:Sewage

discharge hose storage

located in driver’s side

storage drawer.

Picture G-P18:Sewage

hose discharge valve.

Macerator manual

crank handle

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 77 78

Keine Kommentare

Chevrolet Roadtrek Bedienungsanleitung Seite 55