Chevrolet 2005 Malibu Spezifikationen PDF herunterladen (Seite 148)

Brake System Warning Light

Your vehicle’s hydraulic brake system is divided into

two parts. If one part isn’t working, the other part can

still work and stop you. For good braking, though,

you need both parts working well.

If the warning light comes on, there is a brake problem.

Have your brake system inspected right away.

This light should come on brieﬂy when you turn the

ignition key to ON. If it doesn’t come on then, have it

ﬁxed so it will be ready to warn you if there’s a problem.

When the ignition is on, the brake system warning

light will also come on when you set your parking brake.

The light will stay on if your parking brake doesn’t

release fully. If it stays on after your parking brake is

fully released, it means you have a brake problem.

The Driver Information Center (DIC) may display a Low

Brake Fluid or Push Park Pedal message. These

messages might help to determine why the brake

system warning light is on. See DIC Warnings and

Messages on page 3-50.

If the light comes on while you are driving, pull off the

road and stop carefully. You may notice that the pedal is

harder to push. Or, the pedal may go closer to the

ﬂoor. It may take longer to stop. If the light is still on,

have the vehicle towed for service. See Towing

Your Vehicle on page 4-35.

{CAUTION:

Your brake system may not be working

properly if the brake system warning light

is on. Driving with the brake system warning

light on can lead to an accident. If the light

is still on after you have pulled off the road

and stopped carefully, have the vehicle towed

for service.

United States

Canada

3-36

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 409 410

Keine Kommentare

Chevrolet 2005 Malibu Spezifikationen Seite 148