Chevrolet 1994 Blazer Bedienungshandbuch Seite 82

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 385
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 81
To
release the parking brake:
Hold the regular brake
pedal down. Pull the
lever, located just
above the parking
brake pedal, marked
RELEASE
to
release
the parking brake.
If the ignition is on when the parking brake is released, the brake system
warning light will
go
off.
NOTICE:
Driving with the parking brake on can cause your rear brakes
to
overheat. You may have to replace them, and you could also
damage other parts
of
your
vehicle.
If
you are towing a trailer and are parking
on
any
hill: See “Towing a
Trailer” in the Index. That section shows what to do first to keep the trailer
from moving.
Torque
Lock
The parking brake should be set first whenever
you
leave the driver’s seat.
If
you
are
parked
on
a hill and the transmission
is
placed in
“P’
(Park)
before the parking brake is set, the weight
of
the vehicle may put
too
much
force on the parking pawl in the transmission. It may be difficult to pull the
selector lever out
of
“P”
(Park). This is called “torque lock.” To prevent this,
the parking brake should be set
BEFORE moving the gear selector to “P”
(Park).
When preparing to move a vehicle parked on a hill, the selector lever should
be moved out
of
“P” (Park)
BEFORE
releasing the parking brake. Even
when on level surfaces, its a good idea to set the parking brake first before
shifting the transmission from
“P”
(Park).
If
torque lock does occur,
you
may have
to
have another vehicle nudge your
vehicle uphill a
little
to take some of the pressure off the transmission while
you pull the selector lever
out
of
“P’ (Park).
2-27
Seitenansicht 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 384 385

Kommentare zu diesen Handbüchern

Keine Kommentare