Chevrolet 1999 Tahoe Bedienungshandbuch PDF herunterladen (Seite 336)

yellowblue

6-56

Foreign materials such as calcium chloride and other

salts, ice melting agents, road oil and tar, tree sap, bird

droppings, chemicals from industrial chimneys, etc., can

damage your vehicle’s finish if they remain on painted

surfaces. Wash the vehicle as soon as possible. If

necessary, use non

-abrasive cleaners that are marked

safe for painted surfaces to remove foreign matter.

Exterior painted surfaces are subject to aging, weather

and chemical fallout that can take their toll over a period

of years. You can help to keep the paint finish looking

new by keeping your vehicle garaged or covered

whenever possible.

Protecting Exterior Bright Metal Parts

Bright metal parts should be cleaned regularly to keep

their luster. Washing with water is all that is usually

needed. However, you may use chrome polish on

chrome or stainless steel trim, if necessary.

Use special care with aluminum trim. To avoid

damaging protective trim, never use auto or chrome

polish, steam or caustic soap to clean aluminum. A

coating of wax, rubbed to high polish, is recommended

for all bright metal parts.

Cleaning Aluminum Wheels

(If Equipped)

Keep your wheels clean using a soft clean cloth with

mild soap and water. Rinse with clean water. After

rinsing thoroughly, dry with a soft clean towel. A wax

may then be applied.

The surface of these wheels is similar to the painted

surface of your vehicle. Don’t use strong soaps,

chemicals, abrasive polishes, abrasive cleaners or

abrasive cleaning brushes on them because you could

damage the surface.

Don’t take your vehicle through an automatic car wash

that has silicon carbide tire cleaning brushes. These

brushes can also damage the surface of these wheels.

Cleaning Tires

To clean your tires, use a stiff brush with a tire cleaner.

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 423 424

Keine Kommentare

Chevrolet 1999 Tahoe Bedienungshandbuch Seite 336