Chevrolet 2000 Venture Bedienungshandbuch PDF herunterladen (Seite 120)

2-16

Mode 4: Both Features On (This combines Modes 2

and 3.)

Vehicles are delivered programmed in Mode 4.

To change the mode:

1. Follow the instructions for “Entering Programming

Mode” listed previously.

2. Turn the interior lamps control all the way clockwise

and then back slightly counterclockwise.

3. Count the number of chimes you hear. The number

of chimes tells you which mode your vehicle is in.

You can change the mode by turning the interior

lamps control all the way clockwise and then back

slightly counterclockwise.

4. Repeat Step 2 until you hear the number of chimes

that matches the mode you want.

The mode you selected is now set. You can either exit

the programming mode by following the instructions

later in this section or program the next feature available

on your vehicle.

Automatic Door Locks

With automatic door locks, all doors will automatically

lock when you shift out of PARK (P) and automatically

unlock when the ignition is turned to OFF.

To customize these features to your preference,

see “Programmable Modes” following.

Programmable Modes

Your vehicle can be programmed to one of the

following modes.

Mode 1: Both Features Off (Automatic door locking

and unlocking is disabled. You will always need to lock

your doors manually before driving to increase

occupant safety.)

Mode 2: Automatic Door Locking Only

The automatic door unlock feature is turned off.

Shift out of PARK (P) with the ignition on and the

driver’s door closed; all doors will lock automatically.

Mode 3: Automatic Unlocking with the Ignition Off

Turn off the ignition with the transaxle in PARK (P);

all doors will unlock automatically.

Shift out of PARK (P) with the ignition on and the

driver’s door closed; all doors will lock automatically.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 428 429

Keine Kommentare

Chevrolet 2000 Venture Bedienungshandbuch Seite 120