Chevrolet 2006 SSR Pickup Spezifikationen PDF herunterladen (Seite 106)

100

101

Windscreen

A. Windscreen

B. Bevelled Notch in Carpeted Seatback Bumper

C. Protective Cap on Carpeted Seatback Bumper

The vehicle may have a windscreen (A) installed to the

rear of each seat to lessen wind noise while the

convertible roof is retracted. The convertible roof can be

opened or closed with the windscreen installed. The

vehicle must have the correct seatback bumpers

to install the windscreen.

The correct seatback bumpers have a bevelled

notch (B) above the seat’s inboard protective cap (C).

The notch allows the bumper to ﬁt over the windscreen

bracket which mounts to the inboard mounting studs.

Install the windscreen by following these steps:

1. Before installing the windscreen, the convertible top

must be fully retracted and the seats moved forward.

2. Remove the windscreen from its protective bag.

3. Locate the carpeted seatback bumper behind

each seat.

4. Remove protective caps from the bumpers.

5. Loosen the four seatback bumper nuts from

each seat. It is not necessary to remove the

bumpers completely.

6. With the seatback bumpers loosened, slide the

windscreen mounting brackets behind the

seatback bumpers. The angled portion of the

mounting brackets should rest tightly into the bevels

of the seatback bumpers.

7. Tighten the bumper nuts and reinstall the protective

molding caps.

When not using the windscreen, store it in its protective

bag. To remove the windscreen, reverse the steps

listed previously.

Rear View of Seatback

2-46

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 389 390

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2006 SSR Pickup Spezifikationen Seite 106

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2006 SSR Pickup