Chevrolet 2007 Yukon XL Denali Spezifikationen PDF herunterladen (Seite 172)

5. Press and hold the newly-trained Universal

Home Remote button and observe the

indicator light.

If the indicator light stays on constantly,

programming is complete and your device

should activate when the Universal Home

Remote button is pressed and released.

To program the remaining two Universal Home

Remote buttons, begin with Step 2 under

“Programming Universal Home Remote.”

Do not repeat Step 1 as this will erase all of

the programmed channels.

If the indicator light blinks rapidly for

two seconds and then turns to a constant light,

continue with Steps 6 through 8 following to

complete the programming of a rolling-code

equipped device, most commonly, a garage

door opener.

6. Locate in the garage, the garage door opener

receiver (motor-head unit). Locate the “Learn”

or “Smart” button. This can usually be

found where the hanging antenna wire is

attached to the motor-head unit.

7. Firmly press and release the “Learn” or “Smart”

button. The name and color of the button may

vary by manufacturer.

You will have 30 seconds to start Step 8.

8. Return to the vehicle. Firmly press and hold

the programmed Universal Home Remote

button for two seconds, then release. Repeat

the press/hold/release sequence a second

time, and depending on the brand of the

garage door opener, or other rolling code

device, repeat this sequence a third time to

complete the programming.

The Universal Home Remote should now

activate your rolling-code equipped device.

To program the remaining two Universal Home

Remote buttons, begin with Step 2 of

“Programming Universal Home Remote.”

You do not want to repeat Step 1, as this will

erase all previous programming from the Universal

Home Remote buttons.

172

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 607 608

Kommentare zu diesen Handbüchern

Keine Kommentare