Chevrolet 2007 Yukon XL Denali Spezifikationen PDF herunterladen (Seite 470)

6. Connect the red

positive (+) cable to

the positive (+)

terminal of the

vehicle with the dead

battery. Use a

remote positive (+)

terminal if the vehicle

has one.

7. Do not let the other end touch metal. Connect

it to the positive (+) terminal of the good

battery. Use a remote positive (+) terminal if

the vehicle has one.

8. Now connect the black negative (−) cable to

the negative (−) terminal of the good battery.

Use a remote negative (−) terminal if the

vehicle has one.

Do not let the other end touch anything until

the next step. The other end of the negative (−)

cable does not go to the dead battery. It

goes to a heavy, unpainted metal engine part

or to the remote negative (−) terminal on

the vehicle with the dead battery.

9. Connect the other end of the negative (−)

cable to the remote negative (−) terminal,

on the vehicle with the dead battery.

10. Now start the vehicle with the good battery

and run the engine for a while.

11. Try to start the vehicle that had the dead

battery. If it will not start after a few tries, it

probably needs service.

Notice: If the jumper cables are connected or

removed in the wrong order, electrical

shorting may occur and damage the vehicle.

The repairs would not be covered by your

warranty. Always connect and remove

the jumper cables in the correct order, making

sure that the cables do not touch each other

or other metal.

470

1 2 ... 465 466 467 468 469 470 471 472 473 474 475 ... 607 608

Kommentare zu diesen Handbüchern

Keine Kommentare