Chevrolet 2007 Yukon XL Denali Spezifikationen PDF herunterladen (Seite 498)

After the tires have been rotated, adjust the front

and rear inﬂation pressures as shown on the

tire and loading information label. See Loading

Your Vehicle on page 390 and Inﬂation - Tire

Pressure on page 490, for more information.

Vehicles that have the Tire Pressure Monitor

System (TPMS) will need to have the TPMS

sensors reset after a tire rotation. See “TPMS

Sensor Identiﬁcation Codes” under Tire Pressure

Monitor System on page 492.

Make certain that all wheel nuts are properly

tightened. See “Wheel Nut Torque” under

Capacities and Speciﬁcations on page 548.

{CAUTION:

Rust or dirt on a wheel, or on the parts to

which it is fastened, can make wheel nuts

become loose after a time. The wheel

could come off and cause an accident.

When you change a wheel, remove any

rust or dirt from places where the wheel

attaches to the vehicle. In an emergency,

you can use a cloth or a paper towel to do

this; but be sure to use a scraper or wire

brush later, if needed, to get all the rust or

dirt off. See Changing a Flat Tire on

page 508.

498

1 2 ... 493 494 495 496 497 498 499 500 501 502 503 ... 607 608

Kommentare zu diesen Handbüchern

Keine Kommentare