Chevrolet 2008 Malibu Spezifikationen PDF herunterladen (Seite 54)

Securing a Child Restraint in a Rear

Seat Position

When securing a child restraint in a rear seating

position, study the instructions that came with the child

restraint to make sure it is compatible with this vehicle.

If the child restraint has the LATCH system, see

Lower Anchors and Tethers for Children (LATCH) on

page 1-42 for how and where to install the child restraint

using LATCH. If a child restraint is secured in the

vehicle using a safety belt and it uses a top tether,

see Lower Anchors and Tethers for Children (LATCH)

on page 1-42 for top tether anchor locations.

Do not secure a child seat in a position without a top

tether anchor if a national or local law requires that

the top tether be anchored, or if the instructions

that come with the child restraint say that the top strap

must be anchored.

In Canada, the law requires that forward-facing child

restraints have a top tether, and that the tether be

attached.

If the child restraint does not have the LATCH system,

you will be using the safety belt to secure the child

restraint in this position. Be sure to follow the instructions

that came with the child restraint. Secure the child in the

child restraint when and as the instructions say.

If more than one child restraint needs to be installed in

the rear seat, be sure to read Where to Put the

Restraint on page 1-40.

1. Put the child restraint on the seat.

2. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or

around the restraint. The child restraint instructions

will show you how.

3. Push the latch plate into the buckle until it clicks.

Position the release button on the buckle so that

the safety belt could be quickly unbuckled if

necessary.

1-50

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 411 412

Keine Kommentare

Chevrolet 2008 Malibu Spezifikationen Seite 54