Chevrolet 2008 Tahoe Spezifikationen PDF herunterladen (Seite 57)

Bulb Replacement

Taillamps, Turn Signal, Stoplamps

and Back-up Lamps

A. Taillamp/Stoplamp

B. Back-up Lamp

C. Turn Signal Lamp

D. Sidemarker Lamp

If the taillamp/stoplamp (A) need to be replaced, see

your dealer/retailer.

1. Open the liftgate. See “Power Liftgate” in the

owner’s manual index.

2. Remove the two screws from the taillamp assembly.

3. Pull the taillamp assembly rearward until the inner

pins on the taillamp assembly are disengaged from

the vehicle.

4. Press the release tab, if bulb socket has one, and

turn the bulb socket counterclockwise to remove it

from the taillamp assembly.

5. Pull the old bulb straight out from the bulb socket.

6. Press a new bulb into the bulb socket and insert

it into the taillamp assembly. Turn the bulb socket

clockwise into the taillamp assembly until it clicks.

7. Reinstall the taillamp assembly. When reinstalling,

make sure to line up the pins on the taillamp

assembly with the vehicle. If this is not done the

taillamp assembly cannot be correctly installed.

5-21

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Keine Kommentare

Chevrolet 2008 Tahoe Spezifikationen Seite 57