Chevrolet 2010 Avalanche Bedienungsanleitung PDF herunterladen (Seite 181)

Black plate (51,1)

Chevrolet Avalanche Owner Manual - 2012

Instruments and Controls 5-51

BUTTON & KEY OUT (default): If

the features are enabled through

the EASY EXIT SETUP menu, the

driver seat will move back when the

key is removed from the ignition or

after pressing the easy exit seat

button.

The automatic easy exit seat

movement will only occur one time

after the key is removed from the

ignition. If the automatic movement

has already occurred, and you put

the key back in the ignition and

remove it again, the seat will stay in

the original exit position, unless a

memory recall took place prior to

removing the key again.

NO CHANGE: No change will be

made to this feature. The current

setting will remain.

To select a setting, press the set/

reset button while the desired

setting is displayed on the DIC.

EASY EXIT SETUP

If your vehicle has this feature, it

allows you to select which areas will

recall with the automatic easy exit

seat feature. It also allows you to

turn off the automatic easy exit

feature. See Memory Seats on

page 3‑7 and EASY EXIT RECALL

earlier for more information.

Press the customization button until

EASY EXIT SETUP appears on the

DIC display. Press the set/reset

button once to access the settings

for this feature. Then press the

menu up/down button to scroll

through the following settings:

OFF: No automatic seat exit will

recall.

SEAT ONLY (Default): The driver

seat will recall.

NO CHANGE: No change will be

made to this feature. The current

setting will remain.

To select a setting, press the set/

reset button while the desired

setting is displayed on the DIC.

MEMORY SEAT RECALL

If your vehicle has this feature, it

allows you to select your preference

for the remote memory seat recall

feature. See Memory Seats on

page 3‑7 for more information.

Press the customization button until

MEMORY SEAT RECALL appears

on the DIC display. Press the set/

reset button once to access the

settings for this feature. Then press

the customization button to scroll

through the following settings:

OFF (default): No remote memory

seat recall will occur.

ON: The driver seat and, on some

vehicles, the outside mirrors will

automatically move to the stored

driving position when the unlock

button on the Remote Keyless Entry

(RKE) transmitter is pressed. On

some vehicles with the adjustable

throttle and brake pedal feature, the

pedals will also automatically move.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 507 508

Kommentare zu diesen Handbüchern

Keine Kommentare