Chevrolet 2010 Silverado Bedienungsanleitung PDF herunterladen (Seite 375)

100

101

The traction control

disable button is located

on the instrument panel

below the climate

controls.

The traction control part of StabiliTrak can be turned

off by pressing and releasing the StabiliTrak button if

both systems (traction control and StabiliTrak) were

previously on. To disable both TCS and StabiliTrak,

press and hold the button for five seconds.

TCS and StabiliTrak can be turned on by pressing and

releasing the StabiliTrak button if not automatically shut

off for any other reason.

When TCS or StabiliTrak is turned off, the StabiliTrak

light and the appropriate message will be displayed on

the DIC to warn the driver. The vehicle will still have

brake-traction control when traction control is off, but

will not be able to use the engine speed management

system. See “Traction Control Operation” next for more

information.

When the traction control system has been turned off,

system noises may still be heard as a result of the

brake-traction control coming on.

It is recommended to leave the system on for normal

driving conditions, but it may be necessary to turn the

system off if the vehicle is stuck in sand, mud, ice or

snow, and you want to “rock” the vehicle to attempt to

free it. It may also be necessary to turn off the system

when driving in extreme off-road conditions where high

wheel spin is required. See If Your Vehicle is Stuck in

Sand, Mud, Ice, or Snow on page 5‑27.

When the transfer case is in 4LO, the stability system is

automatically disabled, the StabiliTrak light comes on

and the STABILITRAK OFF message will appear on the

DIC. Both traction control and StabiliTrak are

automatically disabled in this condition.

Traction Control Operation

The traction control system is part of the StabiliTrak

system. Traction control limits wheel spin by

reducing engine power to the wheels (engine speed

management) and by applying brakes to each individual

wheel (brake-traction control) as necessary.

The traction control system is enabled automatically

when the vehicle is started. It will activate and the

StabiliTrak light will flash if it senses that any of the

wheels are spinning or beginning to lose traction

while driving. If traction control is turned off, only the

brake-traction control portion of traction control will

work. The engine speed management will be disabled.

5-7

1 2 ... 370 371 372 373 374 375 376 377 378 379 380 ... 625 626

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2010 Silverado Bedienungsanleitung Seite 375

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2010 Silverado