Chevrolet 2011 Traverse Bedienungsanleitung PDF herunterladen (Seite 37)

Black plate (5,1)

Chevrolet Traverse Owner Manual - 2011

Keys, Doors and Windows 2-5

1. Separate the transmitter with a

flat, thin object, such as a flat

head screwdriver.

.

Carefully insert the tool

into the notch located along

the parting line of the

transmitter. Do not insert

the tool too far. Stop as

soon as resistance is felt.

.

Twist the tool until the

transmitter is separated.

2. Remove the old battery. Do not

use a metal object.

3. Insert the new battery, positive

side facing down. Replace with a

CR2032 or equivalent battery.

4. Snap the transmitter back

together.

Remote Vehicle Start

This vehicle may have a remote

starting feature that starts the

engine from outside of the vehicle.

/ (Remote Start): This button is

located on the RKE transmitter if the

vehicle has remote start.

Laws in some communities may

restrict the use of remote starters.

For example, some laws may

require a person using the remote

start to have the vehicle in view

when doing so. Check local

regulations for any requirements on

remote starting of vehicles.

Do not use the remote start feature

if the vehicle is low on fuel. The

vehicle could run out of fuel.

If the vehicle has the remote start

feature, the RKE transmitter

functions have an increased range

of operation. However, the range

may be less while the vehicle is

running.

There are other conditions which

can affect the performance of the

transmitter, see Remote Keyless

Entry (RKE) System on page 2‑2 for

additional information.

Starting the Engine Using

Remote Start

To start the vehicle:

1. Aim the RKE transmitter at the

vehicle.

2. Press

Q on the RKE transmitter.

3. Immediately after completing

Step 2, press and hold

/ until

the parking lamps flash. If the

vehicle's lights can not be seen,

press and hold

/ for at least

four seconds.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 451 452

Kommentare zu diesen Handbüchern

Keine Kommentare