Chevrolet 2012 Camaro Bedienungsanleitung PDF herunterladen (Seite 101)

Black plate (51,1)

Chevrolet Camaro Owner Manual (Include Mex) - 2012

Seats and Restraints 3-51

5. Pull the shoulder belt all the way

out of the retractor to set the

lock. When the retractor lock is

set, the belt can be tightened but

not pulled out of the retractor.

6. To tighten the belt, push down

on the child restraint, pull the

shoulder portion of the belt to

tighten the lap portion of the belt,

and feed the shoulder belt back

into the retractor. When installing

a forward-facing child restraint, it

may be helpful to use your knee

to push down on the child

restraint as you tighten the belt.

Try to pull the belt out of the

retractor to make sure the

retractor is locked. If the

retractor is not locked, repeat

Steps 5 and 6.

7. Before placing a child in the

child restraint, make sure it is

securely held in place. To check,

grasp the child restraint at the

safety belt path and attempt to

move it side to side and back

and forth. When the child

restraint is properly installed,

there should be no more than

2.5 cm (1 in) of movement.

If the airbag is off, the off indicator in

the passenger airbag status

indicator will come on and stay on

when the vehicle is started.

If a child restraint has been installed

and the on indicator is lit, see “If the

On Indicator is Lit for a Child

Restraint” under Passenger Sensing

System on page 3‑25 for more

information.

To remove the child restraint,

unbuckle the vehicle safety belt and

let it return to the stowed position.

If the seat has a safety belt guide,

return the safety belt into the guide

by snapping the guide around the

webbing.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 443 444

Kommentare zu diesen Handbüchern

Keine Kommentare