Chevrolet 2012 Impala Bedienungsanleitung PDF herunterladen (Seite 216)

Black plate (32,1)

Chevrolet Impala Owner Manual - 2012

9-32 Driving and Operating

Increasing Speed While Using

Cruise Control

If the cruise control system is

already activated:

.

Press and hold the +RES button

on the steering wheel until the

desired speed is reached, then

release it.

.

To increase vehicle speed in

small increments, press the

+RES button. Each time this is

done, the vehicle goes about

1.6 km/h (1 mph) faster.

Reducing Speed While Using

Cruise Control

If the cruise control system is

already activated:

.

Press and hold the SET– button

on the steering wheel until the

lower speed desired is reached,

then release it.

.

To slow down in small amounts,

press the SET– button briefly.

Each time this is done, the

vehicle goes about 1.6 km/h

(1 mph) slower.

Passing Another Vehicle While

Using Cruise Control

Use the accelerator pedal to

increase vehicle speed. When you

take your foot off the pedal, the

vehicle will slow down to the cruise

speed you set earlier.

Using Cruise Control on Hills

How well the cruise control will work

on hills depends upon the vehicle

speed, load and the steepness of

the hills. When going up steep hills,

you might have to step on the

accelerator pedal to maintain your

speed. When going downhill, you

might have to brake or shift to a

lower gear to keep your speed

down. If the brakes are applied the

cruise control will turn off.

Ending Cruise Control

There are three ways to end cruise

control:

.

To disengage cruise control,

step lightly on the brake pedal.

.

Press the [ button on the

steering wheel.

.

To turn off the cruise control,

press the

T button on the

steering wheel.

Erasing Speed Memory

The cruise control set speed

memory is erased from memory by

pressing

T or if the ignition is

turned off.

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 359 360

Kommentare zu diesen Handbüchern

Keine Kommentare