Chevrolet Beat Bedienungshandbuch PDF herunterladen (Seite 50)

LAP BELT

This section is only for the lap belt. To

learn how to wear a lap-shoulder belt,

see Lap-Shoulder Belt on page 2-16.

The vehicle may have a second row

center seating position with a lap belt.

The lap belt has no retractor.

To make the belt longer, tilt the latch

plate and pull it along the belt. Buckle,

position and release it the same way as

the lap part of a lap-shoulder belt.

To make the belt shorter, pull its free

end as shown until the belt is snug.

Make sure the release button on the

buckle is positioned so you would be

able to unbuckle the safety belt quickly

if necessary.

If you find that the latch plate will not

go fully into the buckle, see if you are

using the correct buckle. Be sure that

the latch plate clicks when inserted into

the buckle.

To unlatch the belt, push the button on

the buckle.

Now and then, check that the safety belt

reminder light, safety belts, buckles,

latch plates, retractors, and anchorages

are all working properly. Look for any

other loose or damaged safety belt

system parts that might keep a safety

belt system from doing its job. See your

CHEVROLET retailer to have it

repaired. Torn or frayed safety belts

may not protect you in a crash. They can

rip apart under impact forces. If a belt is

torn or frayed, get a new one right away.

Make sure the safety belt reminder light

is working. See Safety Belt Reminder

on page 4-16.

Keep safety belts clean and dry. See

Safety Belt Care on page 2-21.

SAFETY SYSTEM CHECK

2-20 Seats and Restraints

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 316 317

Kommentare zu diesen Handbüchern

Keine Kommentare