Chevrolet Equinox Wartungshandbuch PDF herunterladen (Seite 17)

Keys, Doors and Windows 1-11

If you power open the liftgate and

the liftgate support struts have lost

pressure, the turn signals flash and

a chime sounds. The liftgate stays

open temporarily, then slowly

closes. See your dealer for service

before using the liftgate.

Obstacle Detection Features

If the liftgate encounters an obstacle

during a power open or close cycle,

a warning chime will sound and the

liftgate will automatically reverse

direction to the full closed or open

position. After removing the

obstruction, the power liftgate

operation can be used again. If the

liftgate encounters multiple

obstacles on the same power cycle,

the power function will deactivate.

The “Manually Close Power Liftgate”

warning message in the Driver

Information Center (DIC) will

display. After removing the

obstructions, the liftgate will resume

normal power operation.

Your vehicle has pinch sensors

located on the side edges of the

liftgate. If an object is caught

between the liftgate and the body

and presses against this sensor, the

liftgate will reverse direction and

open fully. The liftgate will remain

open until it is activated again or

closed manually.

Setting the Power Liftgate

3/4 Mode

To change the liftgate stop position:

1. Turn the liftgate switch to the

3/4 mode position and power

open the liftgate.

2. Stop the liftgate movement at

the desired height by pressing

any switch.

3. Press and hold the button on the

liftgate adjacent to the latch until

the turn signals flash and a beep

sounds to indicate that the new

setting is recorded.

When power opened with the

3/4 mode selected, the liftgate

stops at the new set position.

There is a minimum that the power

liftgate must already be open for the

system to hold it open. The liftgate

cannot be set to stop below that

minimum.

Manual Operation of Power

Liftgate

To change the liftgate to manual

operation, turn the mode switch to

the OFF position.

With the power liftgate disabled and

all of the doors unlocked, the liftgate

can be manually opened and

closed. Manual operation of a

liftgate that also has power

operation requires more effort than

with a standard manual liftgate.

To open the liftgate, press the

touchpad on the handle on the

outside of the liftgate, and lift the

gate open. To close the liftgate, use

the pull cup to lower the liftgate

and close. With the power liftgate

Information Provided by:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 393 394

Kommentare zu diesen Handbüchern

Keine Kommentare