Chevrolet Equinox Wartungshandbuch PDF herunterladen (Seite 81)

Seats and Restraints 2-55

If the child restraint has the LATCH

system, see Lower Anchors and

Tethers for Children (LATCH

System)

on page 2‑45

for how and

where to install the child restraint

using LATCH. If a child restraint is

secured using a safety belt and it

uses a top tether, see Lower

Anchors and Tethers for Children

(LATCH System)

on page 2‑45

for

top tether anchor locations.

Do not secure a child seat in a

position without a top tether anchor

if a national or local law requires

that the top tether be anchored, or if

the instructions that come with the

child restraint say that the top strap

must be anchored.

In Canada, the law requires that

forward-facing child restraints have

a top tether, and that the tether be

attached.

You will be using the lap-shoulder

belt to secure the child restraint in

this position. Follow the instructions

that came with the child restraint.

1. Move the seat as far back as it

will go before securing the

forward-facing child restraint.

When the passenger sensing

system has turned off the right

front passenger frontal airbag

and seat‐mounted side impact

airbag, the off indicator on the

passenger airbag status

indicator should light and stay lit

when you start the vehicle. See

Passenger Airbag Status

Indicator on page 4‑15.

2. Put the child restraint on

the seat.

3. Pick up the latch plate, and run

the lap and shoulder portions of

the vehicle's safety belt through

or around the restraint. The child

restraint instructions will show

you how.

4. Push the latch plate into the

buckle until it clicks.

Position the release button on

the buckle, so that the safety

belt could be quickly unbuckled

if necessary.

Information Provided by:

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 393 394

Kommentare zu diesen Handbüchern

Keine Kommentare