Removing
the
Spare Tire and Tools
The jacking equipment you’ll need is stored by your
vehicle’s rear doors, along the passenger side wall.
Remove your jack cover by pulling it away from the
side wall and down
to
release the tabs securing the top
of
the cover.
Remove the wheel blocks by turning the top nut
counterclockwise. Remove the nut and washer, then pull
the wheel blocks off the bolt. Push down on the bolt and
remove
the
hooked end from the slot. Slide the jack
toward the front
of
the vehicle and lift it from the
mounting. Remove the extension and
the
ratchet from
the pouch.
5-24
Kommentare zu diesen Handbüchern