9.
The other end of the negative
(-)
cable doesn’t go
to the dead battery. It goes to a heavy, unpainted
metal part on the engine
of
the vehicle with the
dead battery. Attach the cable at least
18
inches
(46
cm) away from the dead battery, but not near
engine parts that move. The electrical connection is
just as good there, but the chance of sparks getting
back to the battery is much less.
10.
Now start the vehicle with the good battery and run
the engine for a while.
11.
‘Try to start the vehicle with the dead battery.
If
it
won’t start after a few tries, it probably needs service.
12.
Remove the cables
in
reverse order to prevent
electrical shorting. Take care that they don’t touch
each other or any other metal.
A. Heavy Metal Engine Part
B.
Good Battery
C.
Dead Battery
5-7
Kommentare zu diesen Handbüchern