Chevrolet 1999 Camaro Bedienungshandbuch PDF herunterladen (Seite 104)

yellowblue

2-48

Setting Cruise Control

CAUTION:

If you leave your cruise control switch on when

you’re not using cruise, you might hit a button

and go into cruise when you don’t want to. You

could be startled and even lose control. Keep the

cruise control switch off until you want to use it.

1. Move the cruise control switch to ON.

2. Get up to the speed you want.

3. Push in the SET button at the end of the lever and

release it.

4. Take your foot off the accelerator pedal.

Resuming a Set Speed

Suppose you set your cruise control at a desired speed

and then apply the brake or clutch pedal. This, of course,

shuts off the cruise control. But you don’t need to

reset it.

Once you’re going about 25 mph (40 km/h) or more,

you can move the cruise control switch from ON to R/A

(Resume/Accelerate) for about half a second.

You’ll go right back up to your chosen speed and

stay there.

Increasing Speed While Using Cruise Control

There are three ways to go to a higher speed:

Use the accelerator pedal to get to the higher speed.

Push the set button at the end of the lever, then

release the button and the accelerator pedal. You’ll

now cruise at the higher speed.

To increase your speed in very small amounts,

briefly move the switch to R/A and then release it.

Each time you do this, your vehicle will go about

1 mph (1.6 km/h) faster.

Move the cruise switch from ON to R/A. Hold it

there until you get up to the speed you want, and

then release the switch.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 375 376

Keine Kommentare

Chevrolet 1999 Camaro Bedienungshandbuch Seite 104