Chevrolet 1999 Camaro Bedienungshandbuch PDF herunterladen (Seite 276)

yellowblue

6-24

3. Check both sides of the dipstick, and read the lower

level. The fluid level must be in the COLD area,

below the cross-hatched area, for a cold check or in

the HOT area or cross

-hatched area for a hot check.

4. If the fluid level is in the acceptable range, push the

dipstick back in all the way; then flip the handle

down to lock the dipstick in place.

How to Add Fluid

Refer to the Maintenance Schedule to determine what

kind of transmission fluid to use. See “Recommended

Fluids and Lubricants” in the Index.

Add fluid only after checking the transmission fluid

while it is hot. (A cold check is used only as a

reference.) If the fluid level is low, add only enough of

the proper fluid to bring the level up to the HOT area for

a hot check. It doesn’t take much fluid, generally less

than one pint (0.5 L). Don’t overfill.

NOTICE:

We recommend you use only fluid labeled

DEXRON

-III, because fluid with that label is

made especially for your automatic transmission.

Damage caused by fluid other than

DEXRON

-III is not covered by your new

vehicle warranty.

After adding fluid, recheck the fluid level as

described under “How to Check.”

When the correct fluid level is obtained, push the

dipstick back in all the way.

Manual Transmission Fluid

When to Check

A good time to have it checked is when the engine oil is

changed. However, the fluid in your manual

transmission doesn’t require changing.

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 375 376

Keine Kommentare

Chevrolet 1999 Camaro Bedienungshandbuch Seite 276