Chevrolet 2006 Epica Spezifikationen PDF herunterladen (Seite 244)

What to Use

Use a 50/50 mixture of clean, drinkable water and

coolant that meets GM speciﬁcation 1825M, which will

not damage aluminum parts. You can also use a recycled

coolant conforming to GM speciﬁcation 1825M with a

complete coolant ﬂush and reﬁll. If you use this coolant

mixture, you do not need to add anything else.

{CAUTION:

Adding only plain water to your cooling

system can be dangerous. Plain water, or

some other liquid such as alcohol, can boil

before the proper coolant mixture will. Your

vehicle’s coolant warning system is set for

the proper coolant mixture. With plain water

or the wrong mixture, your engine could get

too hot but you would not get the overheat

warning. Your engine could catch ﬁre and you

or others could be burned. Use a 50/50 mixture

of clean, drinkable water and the proper

coolant.

Notice: If you use an improper coolant mixture,

your engine could overheat and be badly damaged.

The repair cost would not be covered by your

warranty. Too much water in the mixture can freeze

and crack the engine, radiator, heater core and

other parts.

If you have to add coolant more than four times a year,

have your dealer check your cooling system.

Notice: If you use extra inhibitors and/or additives

in your vehicle’s cooling system, you could

damage your vehicle. Use only the proper mixture

of the engine coolant listed in this manual for

the cooling system. See Part D: Recommended

Fluids and Lubricants on page 6-25 for more

information.

5-20

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 367 368

Keine Kommentare

Chevrolet 2006 Epica Spezifikationen Seite 244