Chevrolet 2006 Tahoe Spezifikationen PDF herunterladen (Seite 72)

100

101

6. If your child restraint manufacturer recommends

using a top tether, and the position that you are

using has a top tether anchor, attach and tighten the

top tether to the top tether anchor. Refer to the

instructions that came with the child restraint and to

Lower Anchors and Tethers for Children (LATCH)

on page 1-57.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, if the top tether is attached

to the top tether anchor, disconnect it. Unbuckle the

vehicle’s safety belt and let it go back all the way. The

safety belt will move freely again and be ready to

work for an adult or larger child passenger.

Securing a Child Restraint in the

Center Rear Seat Position

Second Row

The center seat position in the second row has a

lap-shoulder belt which works the same way as the

safety belt in the rear outside seat positions. For

instructions on how to secure a child restraint using a

lap-shoulder belt see, Securing a Child Restraint in

a Rear Outside Seat Position on page 1-64.

Third Row

If your child restraint is equipped with the LATCH

system, see Lower Anchors and Tethers for Children

(LATCH) on page 1-57.

The center seat position in the third row has a lap belt.

Be sure to follow the instructions that came with the

child restraint. Secure the child in the child restraint

when and as the instructions say.

1. Make the belt as long as possible by tilting the latch

plate and pulling it along the belt.

2. Put the child restraint on the seat.

1-66

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 535 536

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2006 Tahoe Spezifikationen Seite 72

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2006 Tahoe