Chevrolet 2012 Silverado Bedienungsanleitung PDF herunterladen (Seite 211)

Black plate (63,1)

Chevrolet Silverado Owner Manual - 2012

Instruments and Controls 5-63

To program up to three devices:

1. From inside the vehicle, press

the two outside buttons at the

same time for one to

two seconds, and immediately

release them.

2. In the garage, locate the

garage door opener receiver

(motor-head unit). Find the

“Learn” or “Smart” button. It can

usually be found where the

hanging antenna wire is

attached to the motor-head unit

and may be a colored button.

Press this button. After pressing

this button, complete the

following steps in less than

30 seconds.

3. Immediately return to the

vehicle. Press and hold the

Universal Home Remote button

that will be used to control the

garage door until the garage

door moves. The indicator light,

above the selected button,

should slowly blink. This button

may need to be held for up to

20 seconds.

4. Immediately, within one second,

release the button when the

garage door moves. The

indicator light will blink rapidly

until programming is complete.

5. Press and release the same

button again. The garage door

should move, confirming that

programming is successful and

complete.

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 607 608

Kommentare zu diesen Handbüchern

Keine Kommentare