Chevrolet 2012 Silverado Bedienungsanleitung PDF herunterladen (Seite 466)

Black plate (42,1)

Chevrolet Silverado Owner Manual - 2012

10-42 Vehicle Care

To adjust the vertical aim:

1. Open the hood. See Hood on

page 10‑5

2. Locate the aim dot on the lens of

the low‐beam headlamp.

3. Record the distance from the

ground to the aim dot on the

low‐beam headlamp.

4. At a wall, measure from the

ground upward (A) to the

recorded distance from

Step 3 and mark it.

5. Draw or tape a horizontal line (B)

on the wall the width of the

vehicle at the height of the mark

in Step 4.

Notice: Do not cover a headlamp

to improve beam cut-off when

aiming. Covering a headlamp may

cause excessive heat build-up

which may cause damage to the

headlamp.

6. Turn on the low-beam

headlamps and place a piece of

cardboard or equivalent in front

of the headlamp not being

adjusted. This allows only the

beam of light from the headlamp

being adjusted to be seen on the

flat surface.

1 2 ... 461 462 463 464 465 466 467 468 469 470 471 ... 607 608

Kommentare zu diesen Handbüchern

Keine Kommentare