Chevrolet Cobalt 2005 Spezifikationen PDF herunterladen (Seite 264)

100

101

To adjust the vertical aim on the headlamps, do the

following:

1. Find the aim dot on the lens of the low-beam lamp.

2. Measure the distance from the ground to the aim

dot on the lamp. Record the distance.

3. At the wall or other ﬂat surface, measure from the

ground upward the recorded distance from Step 2

and draw or tape a horizontal line the width of

the vehicle.

4. Turn on the low-beam headlamps and place a

piece of cardboard or equivalent in front of the

headlamp not being aimed. This should allow only

the beam of light from the headlamp being

aimed to be seen on the ﬂat surface.

Notice: Do not cover a headlamp to improve beam

cut-off when aiming. Covering a headlamp may

cause excessive heat build-up which may cause

damage to the headlamp.

5-46

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 359 360

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet Cobalt 2005 Spezifikationen Seite 264

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet Cobalt 2005