Chevrolet Cobalt 2005 Spezifikationen PDF herunterladen (Seite 267)

100

101

5. Pull the headlamp assembly up on an angle and

towards the radiator to remove.

6. Disconnect the bulb base from the wiring harness

by lifting the plastic locking tab.

7. To replace a headlamp bulb, do the following:

• Disconnect the wiring harness from the bulb

socket.

• Remove the black retainer by turning it

counterclockwise.

8. Turn the bulb socket for the headlamp, front turn

signal or parking lamp counterclockwise to remove.

For the sidemarker bulb, you will need to us a

tool to assist in turning the bulb socket.

9. Pull the old bulb out of the socket.

10. Install a new bulb.

11. Reinstall the bulb assembly by reversing

Steps 1 through 8.

When reinstalling the headlamp assembly, ﬁrst

ensure that the wiring harness is in its original

position. If not, the headlamp assembly will not ﬁt

correctly.

You will also need to line up the two tabs on the

bottom of the assembly that ﬁt into two slots in the

headlamp assembly bracket.

Center High-Mounted

Stoplamp (CHMSL)

To replace a CHMSL bulb, do the following:

1. Open the trunk. See Trunk on page 2-9 for more

information.

2. Locate the CHMSL bulb assembly in the trunk lid.

3. Use a tool to depress the plastic tabs to release the

bulb assembly.

5-49

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 359 360

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet Cobalt 2005 Spezifikationen Seite 267

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet Cobalt 2005