Chevrolet 2006 Monte Carlo Spezifikationen PDF herunterladen (Seite 320)

How to Add Fluid

Refer to the Maintenance Schedule to determine

what kind of transaxle ﬂuid to use. See

Recommended Fluids and Lubricants on page 415.

If the ﬂuid level is low, add only enough of the

proper ﬂuid to bring the level into the

cross-hatched area on the dipstick.

1. Pull out the dipstick.

2. Using a long-neck funnel, add enough ﬂuid at

the dipstick hole to bring it to the proper level.

It does not take much ﬂuid, generally less

than one pint (0.5 L). Do not overﬁll.

Notice: Use of the incorrect automatic

transaxle ﬂuid may damage your vehicle, and

the damages may not be covered by your

warranty. Always use the automatic transaxle

ﬂuid listed in Recommended Fluids and

Lubricants on page 415.

3. After adding ﬂuid, recheck the ﬂuid level as

described under “How to Check Automatic

Transaxle Fluid,” earlier in this section.

4. When the correct ﬂuid level is obtained, push

the dipstick back in all the way.

Engine Coolant

The cooling system in your vehicle is ﬁlled with

DEX-COOL

®

engine coolant. This coolant is

designed to remain in your vehicle for ﬁve years or

150,000 miles (240 000 km), whichever occurs

ﬁrst, if you add only DEX-COOL

®

extended

life coolant.

The following explains your cooling system and

how to add coolant when it is low. If you have

a problem with engine overheating or if you need

to add coolant to the radiator, see Engine

Overheating on page 323.

A 50/50 mixture of clean, drinkable water and

DEX-COOL

®

coolant will:

• Give freezing protection down to −34°F (−37°C).

• Give boiling protection up to 265°F (129°C).

• Protect against rust and corrosion.

• Help keep the proper engine temperature.

• Let the warning lights and gages work as they

should.

320

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 455 456

Kommentare zu diesen Handbüchern

Keine Kommentare