Chevrolet 2012 Corvette Technical Information PDF herunterladen (Seite 14)

HIGH PERFORMANCE DRIVING FEATURES

Manual Transmission Operation

The 6-speed manual transmission includes a 1-to-4 shift feature that helps achieve the

best possible fuel economy. The shift light will turn on when, from a standstill,

acceleration and vehicle qualifications are met. When the shift light is on, the transmission

can be shifted only from 1st to 4th gear. Forcing the shift lever into any other gear may

damage the transmission.

See Driving and Operating in your Owner Manual.

Run-Flat Tires

The run-flat tires eliminate the need for a spare tire. The tire design enables safe function

during and after loss of pressure for some distance at a moderate speed. Driving only a

short distance with a loss of pressure increases the chance that the tire can be repaired.

Contact Roadside Assistance as soon as possible for the nearest run-flat tire servicing

facility to have the tire inspected.

Tire Pressure Monitor

The Low Tire Pressure warning light on the instrument cluster illuminates when a

significant reduction in pressure occurs in one or more of the vehicle’s tires. The warning

light will remain on until the tire pressure is corrected. Current tire pressures can be

displayed using the Gauges button on the Driver Information Center.

Tire pressure is affected by cold weather and distance driven. If the low tire pressure

warning light illuminates and then turns off as the vehicle is driven in cooler temperatures,

check for the proper tire pressures.

PS Cup Tires✦

Z06 and ZR1 models may be equipped with PS Cup tires. These tires are optimized for

warm, dry road conditions and have a reduced tread wear rating.

Groove Tracking

The wide tires on the Corvette provide sure-footed grip and excellent road feel; however,

the wider design may also be more susceptible to grooves or wear patterns on some

roads.

Tire Chatter

During hard, slow turns, such as parking, the difference in steering angle of the tires may

cause one tire to slide or hop lightly to keep up with the other tire. This hop of the wide

tires may cause a chatter sound. The noise will stop as the wheels are straightened.

Brake Dust

The high performance brake materials and large size of the brakes may result in a fine

dust coating the outer surface of the wheels. Wash the wheels with regular soap and

water to remove the dust.

Note: Automatic car washes are not recommended.

See Vehicle Care in your Owner Manual.

1 2 ... 9 10 11 12 13 14 15 16

Keine Kommentare

Chevrolet 2012 Corvette Technical Information Seite 14