Chevrolet 1996 Blazer Bedienungshandbuch Seite 83

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 392
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 82
4LO:
This setting also engages your front axle to give
you
extra traction.
You
may never need 4LO.
It
sends
the
maximum power to all four wheels. You might
choose 4LO
if
you
were driving off-road in sand, mud
or deep snow and climbing or descending steep hills.
Indicator lights
in
the
switches show you which setting
you
are in. The indicator lights will come
on
briefly when
you turn
on
the ignition and one will stay
on.
If
the lights
do not come on, you should take your vehicle
in
for
service. An indicator light will flash while shifting.
It
will
remain illuminated when the shift is completed.
Shifting
from
2HI
to
4HI'
Press and release the 4HI switch. This can be done at
any speed, and the front axle will lock automatically.
Shifting from 4HI
to
2HI
Press and release
the
2HI
switch. This can be done at
any speed, and the front axle will unlock automatically.
Shifting
from
2HI
or
I1
to
4LO
To shift from
tHI
or 4HI
to
4L0, the vehicle must be
stopped or moving less than
3
mph
(4.8
km/h) with the
transmission
in
NEUTRAL
(N)
in
vehicles equipped
with an automatic transmission or the clutch pedal
engaged in vehicles equipped with a manual
transmission. The preferred method for shifting into
4LO is
to
have your vehicle moving
1
to
2
mph
(1.6
to
3.2
km/h). Press and release the 4LO switch.
You
must wait for the 4LO indicator light to stop
flashing and remain illuminated before shifting your
transmission
into
gear or releasing the clutch pedal.
If
the 4LO switch is pressed when your vehicle is in
gear and/or moving, the 4LO indicator light will flash
for
30
seconds and not complete the shift unless your
vehicle is moving slower than
3
mph
(4.8
km/h) and
the
transmission is in NEUTRAL
(N)
or the clutch
pedal engaged.
On automatic transmission equipped vehicles, if your
transfer case does not shift into 4L0, your transmission
indicator switch may require adjustment. With your
transmission
in
NEUTRAL
(N),
press and release the
4LO switch. While the 4LO indicator light is flashing,
shift your transmission into PARK (P). Wait until the
4LO indicator light remains illuminated before shifting
your transmission
into
gear. This will get you
into
4L0,
but you should take your vehicle
in
for service
to
restore
normal operation.
2-25
Seitenansicht 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 391 392

Kommentare zu diesen Handbüchern

Keine Kommentare