Chevrolet 2005 Corvette Spezifikationen PDF herunterladen (Seite 66)

100

101

3. Go to the rear of the vehicle and insert the vehicle

key into the key cylinder located above the license

plate. See Hatch/Trunk on page 2-14 for more

information on the key cylinder.

4. Open the trunk.

5. Turn the key ﬁve times within ﬁve seconds.

6. The DIC message will display OFF-ACCESORY

TO LEARN.

7. Press the ACC button (ignition switch).

8. The DIC will read WAIT 10 MINUTES and will

count down to zero, one minute at a time.

9. The DIC will display OFF-ACCESSORY TO

LEARN again.

10. Press the ACC button (ignition switch).

11. The DIC will read WAIT 10 MINUTES and will

count down to zero, one minute at a time.

12. The DIC will display OFF-ACCESSORY TO

LEARN again.

13. Press the ACC button (ignition switch).

14. The DIC will read WAIT 10 MINUTES and will

count down to zero, one minute at a time.

15. A beep will sound and the DIC will read READY

FOR FOB #1. At this time, all previously known

transmitters have been erased.

16. Once the transmitter is recognized and

programmed, a beep will sound and the DIC will

display READY FOR FOB #2.

If you have additional transmitters to program, take

transmitter 1 out of the transmitter pocket and place

transmitter 2 in the pocket. This can be done repeatedly

until up to four transmitters have be programmed.

The DIC will then display MAX # FOBS LEARNED and

will exit the programming mode.

When you are done programming transmitters, press

the ACC button (ignition switch).

2-8

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 395 396

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2005 Corvette Spezifikationen Seite 66

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2005 Corvette