Chevrolet 2005 Tahoe Wartungshandbuch PDF herunterladen (Seite 32)

Servicing Relays and Fuses

A. Instrument Panel

B. Relay and Fuse Center

C. Stop Tab

The following information tells you how to access your

vehicle’s relay and fuse center for checking and

replacing fuses.

The fuse and relay center is located behind the

instrument panel storage compartment. Remove

contents from the storage tray. Push the right end of

the tray inward to allow the stop tab to clear the

compartment opening. Set the tray down gently toward

the ﬂoor. It will hang from the hinge.

Additional access to the relay and fuse center can be

gained by removing the center from the mounting

bracket. Lift the lock tab on the bottom away from the

bracket, then slide the center down the bracket

about 0.39 inches (10 mm) until it can be lifted away.

Then, using a screwdriver, remove the relay and fuse

center cover by lightly expanding the spring clips

on each side of the cover. Replace the 30 amp mini

fuse with a 30 amp mini fuse. Use a fuse puller if

your vehicle has one. Replace a relay with a

GM Part No. 12088592 relay, or equivalent.

After servicing the center, reinstall the relay center to

the bracket. Engage the D slots, then push upward until

the lock tab drops in place.

Reinstall the storage tray into the compartment by lifting

it into the instrument panel. Push in on the right side

to let the stop tab pass through the opening.

Exploded View of Instrument Panel

14-6

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Keine Kommentare

Chevrolet 2005 Tahoe Wartungshandbuch Seite 32