Chevrolet 2006 Cobalt Spezifikationen PDF herunterladen (Seite 100)

If you cannot shift out of PARK (P), ease pressure

on the shift lever — push the shift lever all the way into

PARK (P) and also release the shift lever button as you

maintain brake application. Then move the shift lever into

the gear you wish. Press the shift lever button before

moving the shift lever. See Shifting Out of Park (P)

(Automatic Transaxle) on page 2-30.

REVERSE (R): Use this gear to back up.

Notice: Shifting to REVERSE (R) while your vehicle

is moving forward could damage the transaxle.

The repairs would not be covered by your warranty.

Shift to REVERSE (R) only after your vehicle is

stopped.

To rock your vehicle back and forth to get out of snow,

ice or sand without damaging your transaxle, see If

Your Vehicle is Stuck in Sand, Mud, Ice, or Snow on

page 4-30.

NEUTRAL (N): In this position, your engine does not

connect with the wheels. To restart when you are

already moving, use NEUTRAL (N) only. Also, use

NEUTRAL (N) when your vehicle is being towed.

{CAUTION:

Shifting into a drive gear while your engine is

running at high speed is dangerous. Unless

your foot is ﬁrmly on the brake pedal, your

vehicle could move very rapidly. You could

lose control and hit people or objects. Do not

shift into a drive gear while your engine is

running at high speed.

Notice: Shifting out of PARK (P) or NEUTRAL (N)

while the engine is running at high speed may

damage the transaxle. The repairs would not be

covered by your warranty. Be sure the engine is not

running at high speeds when shifting your vehicle.

Notice: Shifting to a drive gear from NEUTRAL (N)

while the vehicle is moving could damage the

transaxle. Make sure the vehicle is stopped before

shifting from NEUTRAL (N) into a drive gear.

2-24

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 389 390

Keine Kommentare

Chevrolet 2006 Cobalt Spezifikationen Seite 100