Chevrolet 2007 Optra Spezifikationen PDF herunterladen (Seite 288)

6. Connect the red

positive (+) cable

to the positive (+)

terminal of the

dead battery.

Use a remote positive (+) terminal if the

vehicle has one.

7. Do not let the other end touch metal. Connect

it to the positive (+) terminal of the good

battery. Use a remote positive (+) terminal if

the vehicle has one.

8. Now connect the black negative (−) cable to

the negative (−) terminal of the good battery.

Use a remote negative (−) terminal if the

vehicle has one.

Do not let the other end touch anything until the

next step. The other end of the negative (−)

cable does not go to the dead battery. It goes to

a heavy, unpainted metal engine part or to a

remote negative (−) terminal on the vehicle with

the dead battery.

9. Connect the

other end of the

negative (−) cable at

least 18 inches

(45 cm) away from

the dead battery, but

not near engine

parts that move.

The electrical connection is just as good

there, and the chance of sparks getting back

to the battery is much less.

10. Now start the vehicle with the good battery

and run the engine for a while.

11. Try to start the vehicle that had the dead

battery. If it will not start after a few tries,

it probably needs service.

288

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 421 422

Kommentare zu diesen Handbüchern

Keine Kommentare