Chevrolet 2008 Tahoe Spezifikationen PDF herunterladen (Seite 61)

Remove the valve cap from the tire valve stem. Press

the tire gage ﬁrmly onto the valve to get a pressure

measurement. If the cold tire inﬂation pressure matches

the recommended pressure on the tire and loading

information label, no further adjustment is necessary. If

the pressure is low, add air until you reach the

recommended amount.

If you overﬁll the tire, release air by pushing on the

metal stem in the center of the tire valve. Recheck the

tire pressure with the tire gage.

Be sure to put the valve caps back on the valve stems.

They help prevent leaks by keeping out dirt and moisture.

Tire Pressure Monitor Operation

The Tire Pressure Monitor System (TPMS) is designed

to warn the driver when a low tire pressure condition

exists. TPMS sensors are mounted onto each tire and

wheel assembly. The TPMS sensors monitor the air

pressure in the vehicle’s tires and transmit the tire

pressure readings to a receiver located in the vehicle.

When a low tire pressure

condition is detected, the

TPMS will illuminate the

low tire pressure warning

symbol located on the

instrument panel cluster.

At the same time a message to check the pressure in a

speciﬁc tire appears on the Driver Information Center

(DIC) display. The low tire pressure warning light and the

DIC warning message come on at each ignition cycle

until the tires are inﬂated to the correct inﬂation pressure.

Using the DIC, tire pressure levels can be viewed by the

driver. For additional information and details about the

DIC operation and displays see DIC Warnings and

Messages on page 3-11. Also, see “DIC Operation and

Displays” in the Index of the owner manual for more

information.

5-25

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 83 84

Keine Kommentare

Chevrolet 2008 Tahoe Spezifikationen Seite 61