Chevrolet 2010 Suburban Bedienungsanleitung PDF herunterladen (Seite 461)

100

101

Black plate (27,1)

Chevrolet Tahoe/Suburban Owner Manual - 2010

How to Check Automatic Transmission

Fluid

Notice: Too much or too little fluid can damage the

transmission. Too much can mean that some of the

fluid could come out and fall on hot engine parts or

exhaust system parts, starting a fire. Too little fluid

could cause the transmission to overheat. Be sure

to get an accurate reading if checking the

transmission fluid.

Before checking the fluid level, prepare the vehicle as

follows:

1. Start the engine and park the vehicle on a level

surface. Keep the engine running.

2. Apply the parking brake and place the shift lever in

P (Park).

3. With your foot on the brake pedal, move the shift

lever through each gear range, pausing for about

three seconds in each range. Then, move the shift

lever back to P (Park).

4. Allow the engine to idle (500 – 800 rpm) for at least

one minute. Slowly release the brake pedal.

5. Keep the engine running and press the Trip/Fuel

button or trip odometer reset stem until TRANS

TEMP (Transmission Temperature) displays on the

Driver Information Center (DIC).

6. Using the TRANS TEMP reading, determine and

perform the appropriate check procedure. If the

TRANS TEMP reading is not within the required

temperature ranges, allow the vehicle to cool,

or operate the vehicle until the appropriate

transmission fluid temperature is reached.

6-27

1 2 ... 456 457 458 459 460 461 462 463 464 465 466 ... 613 614

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2010 Suburban Bedienungsanleitung Seite 461

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet 2010 Suburban