Chevrolet 2012 Silverado Bedienungsanleitung PDF herunterladen (Seite 61)

Black plate (15,1)

Chevrolet Silverado Owner Manual - 2012

Keys, Doors, and Windows 2-15

If the vehicle does start, the first key

may be faulty. See your dealer who

can service the PASS-Key III+ to

have a new key made.

It is possible for the PASS-Key III+

decoder to learn the transponder

value of a new or replacement key.

Up to 10 keys may be programmed

for the vehicle. The following

procedure is for programming

additional keys only. If all the

currently programmed keys are lost

or do not operate, you must see

your dealer or a locksmith who can

service PASS-Key III+ to have keys

made and programmed to the

system.

See your dealer or a locksmith who

can service PASS-Key III+ to get a

new key blank cut exactly as the

ignition key that operates the

system.

To program the new additional key:

1. Verify that the new key has a

1

stamped on it.

2. Insert the original, already

programmed key in the ignition

and start the engine. If the

engine will not start, see your

dealer for service.

3. After the engine has started, turn

the key to LOCK/OFF, and

remove the key.

4. Insert the new key to be

programmed and turn it to the

ON/RUN position within

five seconds of turning the

ignition to the LOCK/OFF

position in Step 3.

The security light will turn off

once the key has been

programmed.

5. Repeat Steps 1 through 4 if

additional keys are to be

programmed.

If you lose or damage your

PASS-Key III+ key, see your dealer

or a locksmith who can service

PASS-Key III+ to have a new

key made.

Do not leave the key or device

that disarms or deactivates the

theft-deterrent system in the vehicle.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 607 608

Kommentare zu diesen Handbüchern

Keine Kommentare