Chevrolet Cobalt 2005 Spezifikationen PDF herunterladen (Seite 269)

100

101

5. Remove the taillamp from the quarter panel.

6. Remove the taillamp bulb socket from the assembly

by turning it counterclockwise.

7. Pull the old bulb out of the socket.

8. Install a new bulb.

9. Reverse Steps 1 through 6 to reinstall the taillamp

assembly.

Taillamps, Turn Signal, Stoplamps

and Back-up Lamps

To replace one of these bulbs, do the following:

1. Open the trunk. See Trunk on page 2-9 for more

information.

2. Remove the fastener which holds down the

trunk trim.

3. Remove the outer two screws from the taillamp

assembly.

4. Disconnect the wiring harness by lifting up on the

tab to release and pull it straight out.

5. Remove the taillamp from the quarter panel.

A. Sidemarker

B. Stoplamp/Turn Signal/Taillamp

C. Back-up

6. Locate the bulb you wish to change

7. Remove the taillamp bulb socket from the assembly

by turning it counterclockwise.

8. Pull the old bulb out of the socket.

9. Install a new bulb.

10. Reverse Steps 1 through 6 to reinstall the taillamp

assembly.

5-51

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 359 360

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet Cobalt 2005 Spezifikationen Seite 269

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet Cobalt 2005