Chevrolet TORRENT - NAVIGATION SYSTEM 2008 Spezifikationen PDF herunterladen (Seite 145)

DRIVING YOUR VEHICLE 3–23

If the parking brake status light flashes con-

tinuously, the EPB is only partially applied or

released, or there is a problem with the EPB.

If this light flashes continuously, release the

EPB, and attempt to apply it again. If this light

continues to flash, do not drive the vehicle.

Consult a workshop. We recommend your

Chevrolet authorised repairer. If the parking

brake warning light is on, the EPB has de-

tected an error in another system and is op-

erating with reduced functionality. To apply the

EPB when this light is on, lift up on the EPB

switch and hold it in the up position. Full ap-

plication of the parking brake by the EPB sys-

tem may take a longer period of time than

normal when this light is on.

Continue to hold the switch until the parking

brake status light remains on. If the parking

brake warning light is on, consult a workshop.

We recommend your Chevrolet authorised

repairer.

If the EPB fails to apply, the rear wheels

should be blocked to prevent vehicle move-

ment.

EPB ReleaseEPB Release

EPB ReleaseEPB Release

EPB Release

To release the EPB, place the ignition in the

ON/RUN position, apply and hold the brake

pedal, and push down momentarily on the EPB

switch. If you attempt to release the EPB

without the brake pedal applied, a chime will

sound and the press brake pedal light will

appear.

The EPB is released when the parking brake

status light is off.

If the parking brake warning light is on, the

EPB has detected an error in another system

and is operating with reduced functionality. To

release the EPB when this light is on, push

down on the EPB switch and hold it in the

down position.

EPB release may take a longer period of time

than normal when this light is on. Continue

to hold the switch until the parking brake sta-

tus light is off. If the light is on, consult a

workshop. We recommend your Chevrolet

authorised repairer.

EPB ApplyEPB Apply

EPB ApplyEPB Apply

EPB Apply

The EPB can be applied any time the vehicle

is stopped. The EPB is applied by momentarily

lifting up on the EPB switch. Once fully ap-

plied, the parking brake status light will be

on. While the brake is being applied, the sta-

tus lamp will flash until full apply is reached.

If the light does not come on, or remains flash-

ing, you need to have the vehicle serviced. Do

not drive the vehicle if the parking brake sta-

tus light is flashing. Consult a workshop. We

recommend your Chevrolet authorised re-

pairer. See “ELECTRIC PARKING BRAKE

LAMP” in the index for more information.

If the EPB is applied while the vehicle is in

motion, a chime will sound. The vehicle will

decelerate as long as the switch is held in the

up position. Releasing the EPB switch during

the deceleration will release the parking

brake. If the switch is held in the up position

until the vehicle comes to a stop, the EPB will

remain applied.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 377 378

Kommentare zu diesen Handbüchern

Keine Kommentare