57. Loosen the four front sub-frame nuts until
the bottom of the nut is even with the end of the
threads on the bolt. The gap between the washer
and the sub-frame should be approximately ½”.
58. Remove the two motor mount nuts with a
19mm socket wrench
59. Using a suitable pry bar, pry down the sub-
frame at the front two mounting points. Tempo-
rally push a metal or wooden wedge approxi-
mately 3/8” thick between the frame and sub
frame at these points.
60. Using a fl oor jack and a sturdy piece of wood
between the jack and the bottom of the oil pan,
gently raise the engine.
1/2” Gap
Remove motor
mount nuts
Frame
Sub-frame
Wedge
2005-2007 C6 LS2 Corvette
Kommentare zu diesen Handbüchern