121. Remove the small hose from the bottom of
the reservoir and set it aside for re-mounting in a
later step.
122. Using the length of 5/8” hose supplied,
install the hose connector in the end of it and
secure it with the #10 clamp supplied.
123. Install the 5/8” hose with the connector into
the end of the large PS hose to the pump. Se-
cure the connector with the original spring clamp.
124. Pass the 5/8’ PS hose through the center of
the new serpentine drive belt.
Hose connector
Hose connector
5/8” hose
2005-2007 C6 LS2 Corvette
Kommentare zu diesen Handbüchern