Chevrolet 2001 Impala Bedienungshandbuch PDF herunterladen (Seite 140)

2-70

Programming the HomeLink Transmitter

Do not use the transmitter with any garage door opener

that does not have the “stop and reverse” feature. This

includes any garage door opener model manufactured

before April 1, 1982.

Be sure that people and objects are clear of the garage

door you are programming!

The engine should be turned off while programming the

HomeLink Transmitter. Follow these steps to program

up to three channels:

1. If you have not previously programmed a universal

channel, proceed to Step 2. Otherwise, hold down

the two outside buttons on the HomeLink

Transmitter until the indicator light begins to flash

rapidly (approximately 20 seconds). Then release the

buttons. This procedure initializes the memory and

erases any previous settings for all three channels.

2. Hold the end of the hand

-held transmitter

approximately one to three inches (three to eight cm)

away from the HomeLink Transmitter making sure

that you can still see the display.

3. Decide which one of the three channels you want to

program. Using both hands, press the hand

-held

transmitter button and the desired button on the

HomeLink Transmitter. Continue to hold both

buttons through Step 4.

4. Hold down both buttons until you see the indicator

light on the HomeLink Transmitter flash, first slowly

then rapidly. The rapid flashing, which could take

up to 90 seconds, indicates that the HomeLink

Transmitter has been programmed. Release both

buttons once the light starts to flash rapidly.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 391 392

Keine Kommentare

Chevrolet 2001 Impala Bedienungshandbuch Seite 140